inMusic Support

For general troubleshooting of the Mother-32, we recommend the following steps in order:  Set your panel to match the settings indicated here (link to M32...

  WHAT YOU WILL NEED A Computer with Internet Access A USB-MIDI Cable or Recording Interface with MIDI I/O A program for sending MIDI SysEx files ...

If you change patterns before saving your changes, the changes will be lost. To manually save the pattern press the (SHIFT) + RUN / STOP buttons simultaneou...

To set the playback order, hold down both the (KB) and (STEP) buttons while pressing one of the first four (STEP) buttons. FORWARD / (KB) + (STEP) + 1 ...

When synced to external MIDI clock, the TEMPO/GATE LENGTH knob will function as a “step subdivision” selector.

There are a number of ways to synchronize multiple Mother-32 Analog Synthesizers for greater musical flexibility. This tutorial will walk you through the ba...

There is likely an impedance mismatch. The KB output of the Mother-32 in some circumstances may require the assistance of a buffered mult in order to proper...

Make sure that VCF MODE is set to LP and CUTOFF is all the way up. Make sure ATTACK is all the way down, and DECAY is at least a quarter of the way up.

Check your swing settings. To reset hold SHIFT and move the tempo knob to the center (unity) position.

There is likely an impedance mismatch. The KB output of the Mother-32 in some circumstances may require the assistance of a buffered mult in order to proper...