inMusic Support

For general troubleshooting of the Mother-32, we recommend the following steps in order:  Set your panel to match the settings indicated here.   Reset...

WHAT YOU WILL NEED A Computer with Internet Access A USB-MIDI Cable or Recording Interface with MIDI I/O A program for sending MIDI SysEx files f...

If you alter patterns before saving, your changes will be discarded. To save the pattern manually, hold down the  (SHIFT) + RUN / STOP buttons simultan...

To configure the playback sequence, press and hold both the KB and STEP buttons while also pressing one of the first four STEP buttons. FORWARD / (K...

When synced to external MIDI clock, the TEMPO/GATE LENGTH knob will function as a STEP SUBDIVISION selector.

There are a number of ways to synchronize multiple Mother-32 Analog Synthesizers for greater musical flexibility. This tutorial will walk you through t...

There is likely an impedance mismatch. The KB output of the Mother-32 in some circumstances may require the assistance of a buffered mult in order to p...

Make sure that VCF MODE is set to LP and CUTOFF is all the way up. Make sure ATTACK is all the way down, and DECAY is at least a quarter of the way...

Check your swing settings. To reset hold SHIFT and move the tempo knob to the center UNITY position.

There is likely an impedance mismatch. The KB OUT of the Mother-32 in some circumstances may require the assistance of a buffered mult in order to prop...