If you alter patterns before saving, your changes will be discarded. To save the pattern manually, hold down the (SHIFT) + RUN / STOP buttons simultaneously for about a second. One of the OCTAVE / LOCATION LEDs (1-8) will start blinking rapidly, signaling the location where the pattern will be saved.
To confirm saving the pattern to this location, just press the (SHIFT) + RUN / STOP buttons again. Alternatively, you can use the (KB) button or the (STEP) button to choose a different pattern location. The blinking LED will indicate the selected location. Press the (SHIFT) + RUN / STOP buttons to save your pattern there, or simply press the RUN / STOP button to exit without saving.
NOTE: You may also press and hold (SHIFT) and tap one of the eight corresponding pattern location buttons.
To manually save the pattern to a location in another bank (1-8), first press and hold the (BANK) button while using the (KB) button or the (STEP) button to select a different bank. Release the (BANK) button, and you can now select a pattern location within that bank using the (KB) button or the (STEP) button. Press the (SHIFT) + RUN / STOP buttons to save your pattern to this location, or just press the RUN / STOP button to exit without saving.
NOTE: You can also hold (BANK) and press one of the eight corresponding bank location buttons.
CANCEL / SAVE
To finalize the saving process, press (SHIFT) + RUN / STOP.
If you wish to exit the saving process at any moment, just press RUN / STOP.