inMusic Support

Make sure that the selected step in the sequencer has the velocity up.

DFAM is 100% analog, and as a result, each unit has subtle sonic differences due to component tolerances that make it unique. This means that two diffe...

Your Drummer From Another Mother can be removed from its case, and easily installed into a Eurorack system as a 60HP module. Before doing this, it is i...

To Sync your DFAM to a Mother-32, simply patch from the ASSIGN output jack on the Mother-32 Patchbay, into the ADV / CLOCK input on the DFAM. IMPORT...

To Sync multiple DFAM units together, simply patch from the TRIGGER output on the Patch bay of the Primary unit, into the ADV / CLOCK input on the Seco...

Because the DFAM’s sequencer is fully analog, the design requires the operator to highlight the step before the step in which the operator wants the se...

Make sure that the selected step in the sequencer has the velocity UP.

Patch TRIGGER output into an external piece of gear. This will output a pulse on every step regardless of PITCH/VELOCITY knob position

Patch an external clock source into ADV/CLOCK.

Patching from either the PITCH or VELOCITY output into the TEMPO input will allow the PITCH or VELOCITY 1-8 knobs in the sequencer to determine the len...