Moog | Werkstatt-01 : inMusic Support

Moog | Werkstatt-01

What is the difference between Werkstatt-01 (2020) and the 2014 Moogfest edition?

This production run of Werkstatt-01 features the same 100% analog design of the 2014 Moogfest Werkstatt-01. The key difference is that the 2020 Werkstatt-...

Wed, 5 Jul, 2023 at 10:32 AM

My Werkstatt’s oscillator isn’t in tune when I connect to external an CV Source. Is mine broken?

Your Werkstatt is not broken. Because there can be variances in scaling between different CV instruments, you might notice your Werkstatt ends up out of tun...

Wed, 5 Jul, 2023 at 10:32 AM

The Werkstatt instructions say I need to cut a section out of the black plastic washer to make room for a metal tab on the output jack. I can’t find a metal tab on my output jack. What’s going on?

There was a misprint in the printed instructions included in your box. Your Werkstatt will assemble and work with or without cutting a section from the blac...

Wed, 5 Jul, 2023 at 10:32 AM

I am trying to use my Werkstatt with headphones, but I can’t seem to control the volume. Is there a way to raise and lower the volume for headphone use?

There is no volume control on the Werkstatt, so you may want to run the instrument into a mixer or other device. Since the Werkstatt was designed to be a hi...

Wed, 5 Jul, 2023 at 10:32 AM

Is there a way I can play my Werkstatt via CV?

The Werkstatt can certainly be played with external CV gear: patch the pitch CV into the Werkstatt’s VCO EXP FM In and switch the Werkstatt’s gate On. You m...

Wed, 5 Jul, 2023 at 10:32 AM