Moog | Moogerfooger

MF-104Z | How do I get my MF-104Z to “spill over” when bypassing?
You will need to have the SPILL OVER mod installed by authorized technician. You can reach out to the Service Department (techsupport@moogmusic.com) to find...
Wed, 5 Jul, 2023 at 10:12 AM
MF-104M | How do I change the MIDI Channel on my MF-104M?
The default MIDI Channel for the MF-104M is Channel one. To change this, press and hold both the TAP TEMPO and BYPASS switches. While holding both, send a M...
Wed, 5 Jul, 2023 at 10:12 AM
MF-104M | How can I tell if my MF-104M is being sent MIDI clock?
There are two parameters that can be synced to MIDI. TIME and LFO RATE. When receiving MIDI clock the corresponding LEDs will turn orange. When this happens...
Wed, 5 Jul, 2023 at 10:12 AM
MF-103 | What is the difference between the Main audio output and the Aux audio output on the MF-103 Phaser?
The main output carries the original signal PLUS the phased signal. The Aux output carries the original signal MINUS the phased signal. Generally speaking, ...
Wed, 5 Jul, 2023 at 10:12 AM
MF-102 | When I play quietly, the notes cut off before they die out completely. Is this normal?
Yes. The MF-102 has a squelch circuit that minimizes the bleed through of the carrier oscillator. As the squelch circuit kicks in, it can audibly effect the...
Wed, 5 Jul, 2023 at 10:12 AM
inMusic World Headquarters

200 Scenic View Drive
Suite 201
Cumberland, RI 02864
United States

inMusic Europe LTD

Abbey House, 282 Farnborough Road
Farnborough
Hampshire, GU14 7NA
United Kingdom

inMusic GmbH

Hans Günther Sohl Str. 4a
47807 Krefeld
Germany

inMusic Taipei

7th Floor, NO. 165, Naking East Road
Section 4
Taipei 105
Taiwan

inMusic Japan Corporation

Minami Azabu 1-5-10
Koike Building 1-2F
Minato-ku, Tokyo
106-0047 Japan