Headrush | FAQ

Headrush FAQ

HeadRush | Effect and Control List
The HeadRush Pedalboard, Gigboard, and MX5 are packed with a diverse collection of guitar effects pedal emulations ready to be called into action at any tim...
Wed, 2 Feb, 2022 at 12:36 PM
What does "FRFR" stand for?
FRFR stands for - Full-Range, Flat-Response.   The HeadRush FRFR speakers reproduce your sound with a full frequency range, and a completely flat respon...
Thu, 3 Mar, 2022 at 5:58 PM
HeadRush Looperboard | Frequently Asked Questions
The HeadRush Looperboard is the most powerful and intuitive looper pedal on the planet. With 4-inputs and 4-outputs, quad-core DSP, over nine hours of re...
Wed, 2 Feb, 2022 at 10:47 PM
What is the output power of the FRFR speakers?
The FRFR-112 and FRFR-108 both have a powerful 2000 Watt peak power rating; 1000 Watts Continuous RMS.   
Thu, 3 Mar, 2022 at 6:01 PM
HeadRush MX5 | Frequently Asked Questions
The HeadRush MX5 is the newest and most streamlined multi-fx module from HeadRush! This article will answer the most frequently asked questions to get ...
Thu, 1 Aug, 2024 at 1:29 AM
Can I use other FX modelers with the FRFR speakers?
Absolutely! While the FRFR speakers were designed to be the ultimate companion to the HeadRush boards, their unique design, and transparent response make th...
Thu, 3 Mar, 2022 at 6:08 PM
HeadRush Pedalboard | Frequently Asked Questions
The HeadRush Pedalboard is an all-in-one amp and effects modeler featuring a finely-tuned quad-core processor and powered by its exclusive Eleven HD Ex...
Thu, 3 Feb, 2022 at 12:13 AM
If I'm using a HeadRush Pedalboard, what output level will give me the best signal response?
Like all gain staging, this will depend on the level of the source (i.e. your rig/pedal chain) and the preferred noise level for the room or environment.  ...
Thu, 3 Mar, 2022 at 6:11 PM
Why is my HeadRush Pedalboard clipping the FRFR on the recommended settings?
This may be due to an IR (Impulse Response) being present in your signal chain. Some IR samples have higher natural volume levels and should be turned down ...
Thu, 3 Mar, 2022 at 6:14 PM
Should I use the TRS or XLR input on the FRFR?
Both inputs are line-level, so either XLR or TRS can be used depending on your preference and the output type on your multi-fx/amp modeler. The TRS inputs w...
Thu, 3 Mar, 2022 at 6:16 PM