This guide will cover the simple steps to set up the MPK Mini Plus's transport buttons in MPC Beats.



TABLE OF CONTENTS


MIDI / Sync Settings


1. Launch MPC Beats, and go to Menu (≡) > Edit > Preferences


2. Click on the MIDI / Sync tab, and configure the MIDI ports as seen below:


Input Ports


MPK Mini Plus Port 1 (Control, Track - ON)

MPK Mini Plus Port 2 (Control, Track - ON) 


Output Ports


MPK Mini Plus Port 1 (Sync, Track - ON)

MPK Mini Plus Port 2 (Sync, Track - ON) 


Enable MIDI ports when discovered (ON)



3. Click OK.

Mapping the Transport Buttons with MIDI Learn


1. Click on MIDI Learn (Bottom right side of the app)


2. Load the MPK Mini Plus mapping (Factory > Akai)



3. Click Transport, then click Learn

Note: Enable will also be activated

undefined

4. In the list - click Play, then press the Play button on the MPK mini Plus.

The Play button should appear with Type, Ch and Data values. The Play field should also be lit in white.
 
undefined

Apply the same steps for the other transport buttons.
 
5. Once you have mapped all transport buttons, Click Learn to deactivate this mode (dark grey)

6. Ensure Enable is lit in light grey. This ensures that the mapping is on and usable.
 
image


Your MPK Mini Plus's transport buttons should now be mapped for use in MPC Beats!