You will need to MIDI dump the attached file into the SR16 using a librarian like Bome SendSX for Windows or SysEX Librarian for Mac.
1. Connect the MIDI Out of your USB MIDI interface to the MIDI In of the SR16.
2. Open your librarian software, and select the MIDI output of your MIDI interface.
3. On the SR16, while powered down, hold down the Save/Copy button. Power on the SR16 while holding down the Save/Copy button until it reads Restore MIDI.
The SR16 is now ready to receive the MIDI SysEx file that contains all of its User patterns.
4. Go back to your librarian software, choose to open a file. A new window should open which will allow you to select the SysEx file you downloaded from this article. Select this file then choose the open option.
The SysEx file that holds all of your user patterns has now been loaded into your librarian software. You will see all of the data in your librarian software that makes up the SR16 user patterns.
5. To send the information to the SR16, press the send option in your librarian software, then the SR16 will send back all of the user pattern to your librarian software.