In order for the Flash Start to be able to control your Denon or Marantz Professional media device, the baud rate on the Flash Start must be set the same as the baud rate on your media device.
To set Flash Start’s baud rate to 9600 b/s, press the Fast-Forward and 1 buttons at the same time.
To set Flash Start’s baud rate to 38400 b/s, press the Fast-Forward and 2 buttons at the same time.
To set Flash Start’s baud rate to 115200 b/s, press the Fast-Forward and 3 buttons at the same time.
Following this, press the rewind and fast-forward buttons at the same time to enable the Flash Start to control your media device.
Note: If Flash Start is currently set to control a computer application, you will need to press the Stop and 11 buttons at the same time to switch from USB control to RS-232C control. After doing this, press the rewind and fast-forward buttons at the same time to enable Flash Start to control your media device.
The Denon and Marantz Professional devices that you can control with Flash Start are listed below with their baud rates.
Denon Professional:
DN-500BD (9600, 38400, or 115200 b/s.)
DN-500CB (9600, 38400, or 115200 b/s)
DN-700CB (9600, 38400, or 115200 b/s)
DN-500R (9600 or 38400 b/s)
DN-700R (9600 or 38400 b/s)
DN-501C (9600 or 38400 b/s)
DN-900R (9600 or 38400 b/s)
DN-700C (9600 or 38400 b/s)
Marantz Professional:
PMD-526C (9600, 38400, or 115200 b/s)