The Sheeran Looper X is your ultimate looper workstation for songwriting and live performance. Looper X features Ed Sheeran’s powerful multi-track looper workflows, stadium-grade die-cast aluminum pedals, intuitive 7” touchscreen with real-time metering and waveform rendering, full RGB LED indicator system and a complete toolkit of loop creation and remix functions. 


Designed by Ed and his production team, Looper X utilizes custom DSP powered by HeadRush®, featuring a suite of premium built-in multi-FX, class-leading audio quality and comprehensive connectivity options to help take your looping to the next level. Designed to perform flawlessly night after night, tour after tour, Sheeran Looper X offers musicians from singers, guitarists and keyboard players to violinists, drummers, and beatboxers a new world of creative looping possibilities.


Frequently Asked Questions


General

What is the Sheeran Looper X?

The looper pedal of your dreams is here. Introducing the most powerful and intuitive standalone looper pedal ever: the Sheeran Looper X. The Sheeran Looper X is a 4-in/4-out looper that was built with the goal of pushing the art of looping live audio to the next level, so you can create like never before! 


The Looper leaves no room for compromise: It utilizes a powerful quad-core DSP system that has been tailor-made from the ground up, combined with a 7” touch interface, and a generous set of audio inputs and outputs with premium circuitry for superb sound. 


Plus, there are over eight hours of onboard recording time with intelligent time-stretch, premium onboard effects, external USB/SD loop storage, onboard USB audio interface, and so much more, all in a tour-ready steel chassis.



What are the Sheeran Looper X’s dimensions?
21.72” x 12.6” x 3.96” (55.17 x 32 x 10.06 cm)  (Width x Depth x Height)


How much does the Sheeran Looper X weigh?

16.09 lbs. (7.3 kg) 



Looping Features

How many looper tracks can I record?

You can record up to 4 stereo or mono looper tracks, one at a time.



Can my looper tracks be different lengths?

Yes! Your looper tracks can be different lengths when the looper track mode is set to Song, Sync, Band, or Free Mode.



Can my looper tracks be all the same length?

Yes! Your looper tracks can be different lengths when the looper track mode is set to Multi Mode.



What’s the minimum and maximum length of a looper track?

The minimum length of an individual looper track is 1 second, and there is no maximum length limit.



Can I record a loop where each of the 4 tracks function as different parts of a song (ex. Track 1 is Verse, Track 2 is Chorus, etc.)? 

Yes! You can do this when the looper track mode is set to Song or Band mode. 



Can I predetermine the length of my loop?

Yes! You can set the loop length (from 0 to 64 bars) on the Loop Settings page. 



Can I change the time signature for my loop?

Yes! You can set the time signature to be 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 5/8, 6/8, 7/8, 8/8, 9/8, 10/8, 11/8, 12/8, 13/8, 14/8, and 15/8.



Is there a quantize function so that my loops will always start and end in tempo?

Yes, you can configure Sheeran Looper X to automatically quantize your Rec/Play/Dub or Stop footswitch press to act on the nearest bar, half-note, quarter note, eighth note, or sixteenth note afterwards. You can enable and configure this feature in the Loop Settings menu. 



Is there a Tap Tempo feature? 

Yes. To access it, double tap your Function pedal in quick succession, activating the Purple Tap Tempo function, which will display across the top of the screen. From there, press your RECORD+PLAY footswitch in succession of one bar of music to input tempo, and then press the FUNCTION pedal again to exit the mode.



What does the Intelligent Time Stretch feature do?

The intelligent time stretch feature enables you to change the tempo of your loop without affecting pitch or introducing audio artifacts like clicking or distortion. You can turn this feature on or off in the Loop Settings Menu in the Time Stretch tab.



What are the limits of the Intelligent Time Stretch feature?

You can stretch your recorded audio to be anywhere from half the speed of the original recording, all the way up to twice as fast as your original recording. For example, if you recorded your loop at 120BPM, you could stretch it to be as slow as 60BPM, or as fast as 240BPM while retaining pitch without any unwanted artifacts, etc.



Is there a built-in Click (metronome) feature? 

Yes! There is a built-in click track feature that can be configured on the Loop Settings menu under the Tempo and Click tab. The click can be set to playback whenever you Play or Record, just whenever your record or dub, or whenever you record your first layer when set to Rec (1st Layer)



Can I route the built-in click track to my headphones only? 

Yes! The click track routing is fully assignable, and you can do things like send the click to your headphones output so that you’re the only one that can hear it. To do this enter your Menu from the top left, then tap the Track Category and de-select the Outputs 1-4 under the Click Output



Is there count-in functionality?

Yes! You can set a 1, 2, 3, or 4 bar count-in for your loop in the Loop Settings menu.   



Can I change the Rec/Play Pedal logic order for recording?

Yes! In the Global Settings under General in the Pedal Logic, you can customize what happens immediately after you tap the pedal after recording, sending it to start overdubbing immediately(via RECORD/DUB/PLAY) or instead start playing back without recording(via RECORD/PLAY/DUB),


Can I customize the Track Pedals and Rec/Play Pedal hold functions?

Yes! You can set the hold functions of the Rec/Play/Dub Pedals to Peel the last recoded layer (instead of their default function to undo the last recorded audio recorded or overdubbed) and/or the Track Pedals to either Arm the Overdub Function or to Clear a whole track when held down from on the global settings page on the General tab. 



Does the stereo backing track play independent of the 4 looper tracks?

Yes, the stereo backing track player operates independently of the 4 looper tracks. It's functions are independently controlled through the Backing Track player accessed through the Function pedal>B-Track or through the Menu>Backing Track.



Are any factory loops included with the Sheeran Looper X?

Yes, the Sheeran Looper X includes over 300 exclusive drum and percussion loops from the factory to get you started. 



What does the Length function do? 

You can use the Length function to quickly multiply or divide the length of all of your looper tracks at once. 



What does the Speed function do? 

You can use the Speed function to quickly multiply or divide the speed and pitch of all of your looper tracks at once.



What does the Reverse function do? 

You can use the Reverse function to quickly reverse the playback direction of one track, or reverse all of your looper tracks at once.



What does the Fade function do? 

You can use the Fade function to fade out the volume of one track, or fade out the volume of all of your looper tracks at once.



Can I adjust the speed of the Fade function? 

Yes, you can adjust this on the Fade function page by using footswitches or the Sheeran Looper X’s large push-to-enter knob.



What does the Transpose function do? 

You can use the Transpose function to shift the pitch of one or more looper tracks up or down in semitones. 



What does the Clear function do? 

You can use the Clear function to quickly delete the entire contents of a track.


 

What does the Bounce function do? 

Similar to a 4-track recorder, you can use the Bounce function to quickly copy one or more looper tracks of the loop to a single looper track so that you can free up additional available tracks in your loop.


 

What does the Peel function do? 

You can use the Peel function to permanently delete the top-most layer of a looper track. This enables you to strip your looper track all the way back down to its original layer in the reverse order that they were added.


 

How do the 5 looper track modes work? 

Multi Mode: Use this mode if you want 4 looper tracks with the same length. This is Ed Sheeran's iconic Looper X Workflow. In this mode: 
  • You can record, overdub, or play all looper tracks simultaneously. 
  • All track lengths will be the same length as the first recorded looper track. 
  • When you set a track to record, overdub, or play, it will happen immediately


Song Mode: Use this mode if you want to use each of the 4 looper tracks as a different section of a song (e.g., verse, chorus, bridge, and outro). In this mode: 
  • You can record, overdub, or play on only one looper track at a time. 
  • All looper tracks can be different lengths. 
  • When you set a currently playing track to overdub, it will happen immediately. 
  • When you set a currently stopped track to play or record/overdub, it will happen as soon as the currently playing track reaches its end and stops. When a track is armed for playback or recording/overdubbing while another track is playing back, the corresponding LED will flash green or red, respectively.


Sync Mode: Use this mode if you want 4 looper tracks with different lengths that always stay in sync. In this mode:
  • You can record or play multiple tracks simultaneously. 
  • You must record a master track first. 
  • After the master track has been recorded, all other looper tracks must be the same length or a multiple of its length. 
  • If new tracks are shorter or longer than the master track, Sheeran Looper X will automatically quantize them to keep them in sync with the master track. 
  • When you set a track to record, overdub or play, it will begin doing so when the playhead has reached the end of the loop and starts at the beginning again.


Band Mode: This mode is similar to Song Mode, but it enables you to keep 1 master looper track (e.g., a drum or percussion track) playing at all times while switching between different song sections on looper tracks 2, 3, and 4 (e.g., verse, chorus, and bridge). In this mode: 
  • The master track and only one other looper track can be playing, recording, or overdubbing at the same time.
  • You must record a master track first.  
  • After the master track has been recorded, all other looper tracks must be the same length or a multiple of its length. 
  • Sheeran Looper X will auto-trim (or extend) the endpoints of the other looper tracks to always keep them in sync. 
  • When you set a currently playing track to overdub, it will happen immediately. 
  • When you set a currently stopped track to play or record/overdub, it will happen as soon as the currently playing track reaches its end and stops. When a track is armed for playback or recording/overdubbing while another track is playing back, the corresponding LED will flash green or red, respectively.


Free Mode: This mode is useful for creating ambient soundscapes or for musicians who just like to break the rules! In this mode:
  • You can record, overdub, or play all looper tracks simultaneously. 
  • All looper tracks can be different lengths. 
  • When you set a track to record, overdub, or play, it will happen immediately. 


 


MIDI Features

Can I sync the Sheeran Looper X to an external drum machine?

Yes! The Sheeran Looper X can receive MIDI time code to stay in sync with an external source like a drum machine. This is accessed in the Global Settings>Midi category. When accessed, the clock will lock the Record function, and instead pressing the REC/PLAY will arm the record start to when the midi clock starts on the external device. This function will not work in Song or Free mode.



Can I control the Sheeran Looper X with MIDI?

Yes! You can connect a standard class-compliant MIDI controller to the USB input or the 5-PIN MIDI input to control most of the footswitch functions. A full list of controls available by MIDI can be found in the full Sheeran Looper X user guide.


Functions that require a variable input(such as a a volume level, or a track panning or editing the Crossfade of a track(Fade) are accessed by setting the Midi to a CC message and then sending the value along that CC value. Ex. Setting the Track 1 volume to 75% would require your controller to send CC#14 and value 95(75% of 127).


Functions that are simple ON/OFF like Peeling a track, Muting a Track, or Turning On/Off the FX rack on a track are accessed by sending a Midi Note/Value along CC#3. Ex. If you wanted to mute Track 1, you'd just have your pedal send Midi Note 19 on CC#3 and that would mute the track.


Can I configure the 5-PIN MIDI Out to be a MIDI Thru?

Yes! You can set this in the Global Settings menu under the Midi Thru toggle.



Can I set which MIDI channel for the Sheeran Looper X to use for MIDI messages?

Yes! You can set this in the Global Settings menu. You must first turn on External Midi Control then set the channel in the parameter below it.




Built-in Effects (FX Racks)

What is an FX Rack? 

FX Racks are multi-FX that are assignable to an individual looper track, either before the looper records or applied after the signal as been recorded. They are made up of individual FX that can be individually edited and toggled on/off. Each FX rack is purpose-designed (such as Guitar, Vocals, Lo-fi etc.) to help you get up and running fast with amazing sound.


 

How many FX Racks can run at once?

You can run up to 4 FX racks at once.


 

How many FX Racks are there in total? 

As of firmware v1.0, there are 10 available FX Racks in the Sheeran Looper X: VOCALS, GUITAR, LO-FI, DUB, DRUM, and STUDIO



What individual effects are in the FX Racks?

Ed's Rack
  • OCTAVE
  • WAH
  • COMPRESSOR
  • OVERDRIVE
  • AMP(cabinet model is included under this effect)
  • CHORUS
  • DELAY
  • REVERB
  • 4-BAND EQ
Single FX

Choose any single FX to control on a rack-

  • AMP
  • CHORUS
  • COMPRESSOR
  • DEGRADE
  • DELAY
  • DISTORT
  • DOUBLER
  • DUB DELAY
  • EQ
  • HARMONIZE
  • GATE
  • LPF
  • MOD
  • OCTAVES
  • OVERDRIVE
  • PARAMETRIC EQ
  • PITCH
  • PUMPER
  • REVERB
  • SLICER
  • SMART TUNE
  • SPRING
  • TRANSIENT
  • VINYL
  • WAH
  • WHAM
Vocal FX Rack
  • HP/GATE
  • PITCH
  • DOUBLER
  • DELAY
  • REVERB
  • COMP
  • EQ
Guitar FX Rack
  • WHAM
  • OVERDRIVE
  • WAH
  • AMP
  • MOD
  • SPRING
  • DELAY
Lo-Fi FX Rack
  • LPF
  • VINYL
  • DEGRADE
  • DISTORT
  • PARA EQ
  • DELAY
Dub FX Rack
  • DOUBLER
  • DELAY 
  • DUB-VERB
  • AMB-VERB
  • COMP
  • PARA EQ
Drum FX Rack
  • TRANSIENT
  • DELAY
  • REVERB
  • PARA EQ
  • COMP
Studio FX Rack
  • PITCH
  • DIST
  • MOD
  • DELAY
  • REVERB
  • COMP
  • EQ
Rhythmic FX Rack
  • LPF
  • SLICER
  • PUMPER
  • EQ
  • DELAY
  • REVERB
Vocal-Tuner FX Rack
  • HP/GATE
  • SMART TUNE
  • HARMONIZER
  • DOUBLER
  • DELAY
  • REVERB
  • COMP
  • EQ



Do the FX Racks include all the same Amp Models, Guitar Cabs, and IR loading features from the HeadRush Prime or Core? 

No, the Sheeran Looper X does not contain all of these due to the DSP required for all of the Looper X’s other next-generation looper features, however, using the Sheeran Looper X in combination with a Prime or Core can make for an insanely powerful and versatile setup.


 

Can I customize my footswitch assignments for the FX Racks feature?

Yes, you can assign your footswitches to turn the full FX rack on or off, or you can assign your footswitch to toggle only certain effects within an FX rack.


 

Can I change the LED color of the FX footswitches in the FX Racks feature?

Yes, you can change the LED color of the FX footswitches by tapping the FOOTSWITCH ASSIGN button in the FX Rack menu and then tapping the footswitch number to reveal the available colors.



Can I set the FX footswitches to work as toggle or hold (momentary) switches?

Yes, you can change this by tapping the “PEDAL ASSIGN” button in the FX Rack menu.


 

Can I assign effect parameters from FX Racks to an external expression pedal?

Yes, you can assign up to 4 parameters to an external expression pedal by tapping the EXPRESSION ASSIGN button in the FX Rack menu. 



Can I also assign Looper Track Volume or Looper Track Panning to an external expression pedal?

Yes, you can also assign these to an external expression pedal by tapping “EXPRESSION ASSIGN” in the FX Rack menu. 



Audio Inputs and Outputs

What types of audio inputs and outputs does the Sheeran Looper X have?

  • (4) Combo XLR/TRS 1/4” (6.35 mm) inputs
  • (1) 1/8” (3.5 mm) stereo input (auxiliary device) 
  • (1) 1/4” (6.35 mm) TRS input (expression pedal) 
  • (2) XLR outputs
  • (2) 1/4” (6.35 mm) TRS outputs
  • (1) 1/4” (6.35 mm) TRS output (headphones)



Can I use microphones that require phantom power (+48V) with the Sheeran Looper X? 

Yes! You can enable phantom power for the inputs in the global settings menu.


 

Is there a ground lift function for the XLR outputs?

Yes! You can enable the ground lift for the XLR outputs in the global settings menu.


 

Can I connect the Sheeran Looper X’s 1/4” outputs to a guitar amplifier? 

Yes! You can configure the 1/4” outputs to send at line level or amp level in the global settings menu. 



What bit and sample rates does the Sheeran Looper X operate at?

The system audio internally runs your loops and built-in FX at 32-bit float, 48 kHz. When audio is recorded to a single looper track, it is recorded and stored as a 16-bit, 48 kHz WAV file.


 

What are the detailed input and output audio performance specifications?  

Inputs 1–4 (balanced XLR) 
  • Frequency Response: 20Hz–20kHz(+0.2dB) 
  • Dynamic Range: 111 dB (A-weighted) 
  • Signal-to-Noise Ratio: 110 dB (1 kHz, +4 dBu, A-weighted) 
  • THD+N: 0.003% (1 kHz, +4 dBu, -1 dBFS) 
  • Preamp EIN: -133 dBu (max gain, 40 Ω source, A-weighted), -127 dBu (max gain, 150 Ω source, unweighted) 
  • Max Input Level: +13 dBu
  • Sensitivity: -46 dBu
  • Gain Range: 59 dB 
Inputs 1–4 (balanced 1/4” / 6.35 mm TRS or unbalanced 1/4” TS) 
  • Frequency Response: 20Hz–20kHz(+0.2dB) 
  • Dynamic Range: 111 dB (A-weighted) 
  • Signal-to-Noise Ratio: 110 dB (1 kHz, +4 dBu, A-weighted) 
  • THD+N: 0.003% (1 kHz, +4 dBu, -1 dBFS) 
  • Max Input Level: +20 dBu
  • Input Impedance: 1MΩ 
  • Sensitivity: -20 dBu
  • Gain Range: 40 dB 
Main Outputs 1–2 (impedance-balanced 1/4” / 6.35 mm TRS) 
  • Frequency Response: 20Hz–20kHz(+0.2dB) 
  • Dynamic Range: 113 dB (A-weighted) 
  • THD+N: 0.003% (1 kHz, -1 dBFS)
  • Maximum Output Level: +20 dBu 
  • Output Impedance: 100 Ω 
Main Outputs 3–4 (balanced XLR) 
  • Frequency Response: 20Hz–20kHz(+0.2dB) 
  • Dynamic Range: 113 dB (A-weighted) 
  • THD+N: 0.001% (1 kHz, -1 dBFS) 
  • Maximum Output Level: +20 dBu
  • Output Impedance: 100 Ω 
Headphone Output (1/4” / 6.35 mm TRS) 
  • Frequency Response: 20Hz–20kHz(+0.2dB) 
  • Dynamic Range: 112 dB (A-weighted) 
  • THD+N: 0.008% (1 kHz, -1 dBFS)
  • Maximum Output Level: +20 dBu (unloaded)
  • Power Output: 100 mW RMS (per channel into 32 Ω)
  • Output Impedance: 32 Ω 
Aux Input (stereo 1/8” / 3.5 mm TRS) 
  • Input Level: 2.0 Vrms (+8.22 dBu)




Audio Routing

Can I route any combination of the (4) XLR/TRS 1/4” (6.35 mm) inputs to any looper track?

Yes! You can do this on the track tab of the audio routing page on the Track page.



Can I route the 1/8” (3.5 mm) stereo aux input to any looper track?

No, this input is routed directly to all outputs for auxiliary purposes.



Can I route any combination of the 4 looper tracks to any output?

Yes! You can route any combination of looper tracks to any of the XLR, 1/4” or headphones outputs in stereo or mono.



Does the Sheeran Looper X support stereo instruments (ex. a keyboard or drum machine)? 

Yes! You can link two mono inputs together to become a stereo input on the input tab of the audio routing menu.



Can I adjust the levels for monitoring my inputs and choose which outputs they are monitored on?

Yes! You can adjust the level for monitoring your inputs and select which outputs are monitored on the input tab of the audio routing page. 


 

Can I route the click track to whatever outputs I want?

Yes! You can route the click track to any of the XLR, 1/4” or headphones outputs on the track tab of the audio routing menu.


 

Can I route my backing track to whatever outputs I want?  

Yes! You can route the backing track in stereo to the XLR, 1/4” or headphones outputs on the track tab of the audio routing menu.


 

Can I route an input directly to an output (aka “dry send”)? 

Yes! You can route an input directly to any of the XLR, 1/4” or headphones outputs on the input tab of the audio routing menu on the Input tab.




Recording Features

Can I record to my Mac or PC with the Sheeran Looper X?

Yes, the Sheeran Looper X board can be connected directly to a USB port on your computer for recording straight into your favorite DAW. The USB port will supply 2 channels in and out.
 


What audio is sent to my computer when recording via USB?

The same audio sent to master outputs 1 + 2 will be sent to your computer when recording via USB. 


 

Can I listen to playback while recording with the Sheeran Looper X?

Yes! With the Looper X assigned as the output of your DAW, you can listen to audio playback while recording.


 

What bit rate/sample rates are supported for recording via USB?

The Sheeran Looper X can transfer signals at 24-bit, 44.1kHz, 48kHz, or 96kHz sample rates.


 

What are the minimum system requirements for the Sheeran Looper X? 

The following system requirements are the minimum specifications required for using the Sheeran Looper X with your computer:
  • Windows: Windows 11 
  • Mac: Mac OS X 12-14
  • Host USB port; High-speed USB 2.0 or 3.0


 

Is a software driver available for recording with the Sheeran Looper X?

A Windows driver is available on the support page for Windows users. A driver is not necessary for connection with a Mac, as the device is Class Compliant.




Storage Features

Can I save or load my loops to/from the Sheeran Looper X’s internal memory? 

Yes! You can save your loops directly to the Looper X’s internal memory.


 

How many loops can I store to the Sheeran Looper X’s internal memory?

There is no limit to the actual number of loops that you can store to the Looper X’s internal memory. You can have a total of up to 9 hours and 7 minutes of audio. (around 5.8GB)


 

Can I export or import loops to/from my SD card, USB thumb drive, or USB external hard drive? 

Yes! You can export and import your loops to/from a connected SD Card, USB thumb drive, or USB external hard drive. 


 

How many loops can I store on an external storage device? 

There is no limit to the actual number of loops that you can store on an external storage device. You are only limited to the size of the external storage device’s memory.


 

What file system types are supported when using external SD Cards, USB thumb drives, or USB external hard drives? 

The Sheeran Looper X supports media formatted to FAT16, FAT32, or exFAT file systems.


 

Can I export or import loops to/from my Mac or PC? 

Yes! You can access the loops saved to your internal memory by connecting to a  Mac or PC by using the USB Transfer Mode. Once you’ve entered USB transfer mode, the Sheeran Looper X appears as a storage device on your computer and you can easily drag and drop loops as needed.


 

Can I import my own pre-recorded audio to a looper track?

Yes! You can import audio directly from a connected SD Card, USB thumb drive, or USB external hard drive. Audio files can also be transferred to the Looper X using the USB Transfer Mode and a USB connection to a PC or MAC.



What types of audio files/backing tracks can be imported?

The Looper X currently supports the import of .WAV and MP3 files with sample rates from 44.1 kHz up to 96 kHz and bit depths from 16-bit up to 32-bit. 
Note: After audio is imported to a looper track, these are converted to 16-bit, 48 kHz. Backing tracks are not converted. 
 


 

Firmware Updates

Will you release new firmware updates with new features? 

Yes! Stay up to date on our latest firmware releases by signing up for our email list at www.sheeranloopers.com, and by liking or following us on our social media channels. Look to the bottom right of the page to find links to subscribe to our email list or follow our social media channels. 
 

Where can I download the latest firmware update for the Sheeran Looper X?

You can download the latest firmware by visiting www.sheeranloopers.com and clicking on Downloads. Stay up to date on our latest firmware releases by signing up for our e-mail list at www.sheeranloopers.com, and by liking or following us on our social media channels. 


Questions? Concerns? Feedback? If you are still having trouble, please use the New Support Ticket button at the top to contact our support team for further assistance.