If your turntable is not returning back to starting position after the record is over or is returning back to starting position prematurely, please run a reset via the steps below!
NOTE: You will only need to provide a small amount of force to move the tonearm across the record! Hardware damage may occur if you prevent the tonearm from resetting back to its starting position after resistance is felt
1) Raise the tonearm using the lever represented as #5 in the user manual.
2) Manually move the tonearm across the record until you feel the slightest resistance. The tonearm will then “reset” itself back to the starting position
3) Repeat this process 10 times.
4) Place a record on the turntable and hit play.