Please check the following:
1) Make sure you are using the provided power supply for the module. This should be 9 VDC; 500 mA; center-positive.
2) Check that the cable snake in the back of the module is connected securely, with both screws tight
Modified on: Wed, 19 Oct, 2022 at 4:50 PM
Please check the following:
1) Make sure you are using the provided power supply for the module. This should be 9 VDC; 500 mA; center-positive.
2) Check that the cable snake in the back of the module is connected securely, with both screws tight
Did you find it helpful? Yes No
Send feedback